The environmental maintenance of the central control power supply control room of Zhejiang University mainly includes dust prevention, corrosion prevention and rat prevention. The following measures can be taken to prevent it:
Seal all wiring holes (grooves, pits) that may introduce dust, moisture, corrosive gas, rat damage or other harmful insects;
When installing the anti-static floor, pay attention to the size of the holes in the anti-static floor after installation, at least subject to the fact that rats cannot enter, so as to prevent rats from entering under the floor. Do not place food in the control room, so as to avoid rats.
The air passing through the air conditioning devices (including air conditioners, dehumidifiers, radiators) should be evenly distributed away from the system equipment (do not directly lead the cold air pipes under the floor);
In order to avoid the possibility of local condensation caused by wide range temperature fluctuation, the air conditioning capacity should be correctly determined. Lowering the temperature will increase the relative humidity of the incoming air, so the indoor relative humidity should be controlled;
Do not open doors and windows at will to prevent damage to temperature and humidity control;
During process malfunction or air conditioning equipment failure, it is necessary to ensure relatively low humidity and low air inlet speed to prevent high concentration of gas pollutants from affecting system equipment.
During daily use, pay attention to keeping the environment and equipment clean, and try to ensure that the equipment and the ground are free of floating dust. More relevant precautions come to our website http://www.869h.cn Ask and understand!